Oando Nigeria PLC
BARGE SUPERVISOR The Overall purpose of this position is to monitor the weather conditions and rig motions, advice OIM on conditions likely to affect drilling operations seaworthiness of rig.
1. SPECIFIC DUTIES & RESPONSIBILITIES
· Articulation of the short, medium and long manpower requirements of the division; design and implementation of a business focused learning and development programme;
· Ensure that accurate calculation of load distribution and weights for daily stability reports are maintained.
· Coordinate all helicopter and supply boats traffic – supervise movement of materials and personnel to and from the rig
· Ensure all navigation equipment is properly maintained and ready or use at all times
· Monitor quantities of expendables such as fuel, potable water, drill water et cetera.
· Ensure that cranes are safe working condition.
· Ensure all safety equipment, including lifeboats and fire-fighting equipment is maintained in a state of operational readiness at all times.
· Actively participate in the daily operations meeting with the OIM and other rig department heads.
· Operate and maintain the bulk system as required.
· Supervise test on firefighting equipment, obstacle lighting and audible signals.
· Ensure all lifting gears are inspected and certified, correctly color coded, maintained, and stowed properly.
· Prepare and supervise rig move plans, anchor patterns, and associated mobilization preparations.
· For jack up rigs, prepare the pre-load calculations and carry out jacking operations taking note of weather and sea conditions.
· Ensure that daily marine logs are accurate and completed. Forward copies of these reports to the shore-base office.
· Ensure that all Flag State, Classification Society, statutory regulation, and minimum manning requirements are complied with.
· Coordinate and supervise periodic inspections of the rig’s structure, including hull compartments and critical joints
· Assist in the effective management of the Preventive Maintenance System and ensure all records are properly maintained.
· Supervise the operations operation and maintenance of pollution control sytem.
· Prepare Job Safety Analysis for hazardous marine operations.
2. QUALIFICATIONS & EXPERIENCE
3. KNOWLEDGE & SKILLS REQUIRED
HOW TO APPLY Click here to apply online (Note: You must register and complete your CV first before you can apply) DEADLINE Oct 29, 2010 |
Oando Nigeria PLC: Vacancy for Offshore Installation Manager The Offshore Installation Manager will manage the manpower and resources of the rig to achieve optimum performance so as to ensure that the program is carried out in a safe, efficient and productive manner.
1. SPECIFIC DUTIES & RESPONSIBILITIES
· Manage the planning and efficient execution of the drilling program in coordination with Client Representative and rig heads. Hold daily operations meeting with Client Representative and rig department heads
· Ensure pre-job meeting is carried out for hazardous situations and non- routine operations
· Monitor all onboard equipment and systems usage, supervise testing and inspection of critical equipment and systems, and ensure operational parameters and limits are observed.
· Monitor the application of the Company Preventive Maintenance System program.
· Organize and supervise the activities of drilling, marine and maintenance departments and ensure rig specific procedures are understood and observed by all personnel onboard.
· Responsible, along with Client Representative, for all third party services on the rig.
· Promote and maintain a good working relationship with Client Representatives, department heads, and third party personnel.
· Ensures rig complies with Flag State and certifying Regulatory Bodies.
· Maintain daily communication with the Marine department as related to rig moves, mooring, station keeping and stability. Ensure guidelines of the rig’s Marine Operation and needs.
· Plan operations with the Marine department as related to rig moves, mooring, station keeping and stability. Ensure guidelines of the rig’s Marine Operations Manual are understood and followed.
· Develop and submit a consolidated rig’s annual maintenance budget for approval, and responsible for managing compliance on an annual basis.
· Manages warehouse inventory level to comply with targets
2. QUALIFICATIONS & EXPERIENCE
Valid medical examination and vaccination certificates.
3. KNOWLEDGE & SKILLS REQUIRED
HOW TO APPLY Click here to apply online (Note: You must register and complete your CV first before you can apply) DEADLINE Oct 29, 2010 |
Oando Nigeria PLC Recruiting for Maintenance Supervisor (Electrical / Mechanical) Vacancy Description The primary responsibility of the position is to Supervise and control the maintenance and repair of mechanical, electrical, electronics, subsea, and information technology equipment on the rig.
1. SPECIFIC DUTIES & RESPONSIBILITIES
· Maintain control over the rig’s Preventive Maintenance System (PMS) and associated computer database.
· Coordinate periodic maintenance activities with the OIM and other department heads
· Plan the service and maintenance of equipment according to the PMS guidelines.
· Ensure that reports for repair and maintenance of equipment are accurate and complete.
· Carry out classification society surveys as part of continuous survey of machinery.
· Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig’s stability.
· Ensure that the permit to work and isolation systems are strictly adhered to in the maintenance department.
· Inform the OIM and other department heads of any technical problems or limitations that may affect the safe operation of the rig.
· Maintain an adequate supply of spares in order to fulfil maintenance requirements and facilitate a safe and efficient operations.
· Supply information for maintenance and repairs budget.
· Maintain proper communication with shore based Field Support group, rig management, and equipment vendors.
· Liaise with the OIM to ensure that all third party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig.
· Implement the follow up requirements to audits, as issued by Clients, Regulatory Authorities or rig management.
· Approve all maintenance department requisition purchase orders.
· Document any and all changes to the PMS system and provide reasons for making these changes to Rig Manager via direct supervisor.
· Provide input in the Survey of the vessel and ways to reduce the out of service time of the vessel.
· Exercise fiscal responsibility with regard to maintenance budget.
· Train personnel on the use of the PMS system to reduce error in the system
· Communicate equipment problems or breakdown information.
· Demonstrate commitment to company safety policies through leadership and guidance.
· Ensure regulatory requirements for environmental protection are complied with.
· Report any incidents, potential hazards or abnormal situation to the OIM, other department heads and TSM.
2. QUALIFICATIONS & EXPERIENCE
3. KNOWLEDGE & SKILLS REQUIRED
HOW TO APPLY Click here to apply online (Note: You must register and complete your CV first before you can apply) DEADLINE Oct 29, 2010 |
